Close

Suggestions

Filters

    Solid Brass Fork Caps for Triumph Twins

    Brand: Motone
    €96,50 see below for availability per version
    Fork caps milled from solid aluminium, for all Triumph Twins 2001+. Milled from solid brass, hand polished. Sold as a pair.
    See details and applications below.
    3 variations
    Article number
    MMU512

    Product description

    Version A for the following models with 41mm fork stanchions:
    - Bonneville all versions 2001-2016
    - Thruxton 900 all versions 2004-2016
    - Scrambler 900 all versions 2006-2016
    - America all versions 2001-2017
    - Speedmaster 900 all versions 2003-2017
    - Street Twin 2016-2019 up to VIN 914972 only*
    - Street Scrambler 2017-2019 up to VIN 914447 only*
    - Street Cup 2017-2019
    - Bonneville T100 versions 2017-2020 with unbranded front brake caliper
    - Bobber 2017-2021 with 41mm forks (not Bobber Black)

    *these have the regulator sitting under the yoke, on later bikes it sits behind the radiator.

    Version B for the following models with 41mm fork stanchions:
    - Bonneville T100 versions 2021+ with Brembo front brake caliper
    - Bonneville T120 all versions 2016+
    - Street Twin 2019-2022 from VIN 914973
    - Speed Twin 900 (2022+)
    - Street Scrambler 2019-2022 from VIN 914448
    - Scrambler 900 (2022+)
    - Speed Twin 1200 versions 2019-2021 (not for 2021+ version with Marzocchi forks)
    - Thruxton 1200 std 2016-2021 (not for R/RS)

    Version C for the following models with 47mm fork stanchions:
    - Bobber Black 2018-2021
    - Bobber versions 2021+ (type DX04)
    - Speedmaster 1200 versions 2021+ (type DX04)

    Does not fit any other model/version than those liste above.

    Description
    Motone's "The Guvnors" - pair of fork caps milled from solid brass billet.
    Finished by hand-polishing.
    Direct replacement of the original caps.

    Like all polished brass items, they are initially "shiny gold" but take on a beautiful patina after a few weeks.

    Designed and manufactured by Motone in Great-Britain.

    Fitment
    Undo on of the original fork caps (note: it is under pressure so take care to dampen its release).
    Re-use the original O-ring, cleaned and re-greased and fit the new cap in the same place. Tighten to 22Nm and repeat on the other side.

    Warranty 12 months.

    Reviews

    0 from 5Based on 0 reviews
    Add your own review

    There are no reviews written yet about this product..